Metallic-gray Toyota Camry parked outside an automotive repair garage.

How to Change Oil Toyota Camry (2018–2027

TOYOTA MAINTENANCE / CAMRY 2018–2027

Changing the oil in your Toyota Camry starts with one important check: which engine do you have? A 2022 Camry 2.5L, a 2024 Camry V6 and a 2026 Camry Hybrid do not all take the same oil—or use the same filter procedure.

This guide walks you through draining the old oil, replacing the filter and drain-plug washer, refilling the engine, checking for leaks and resetting the service reminder. It covers U.S.-market 2018–2027 Toyota Camry models, with the differences explained wherever they matter.

If you are shopping for parts, identify your Camry by model year and engine, not just by its LE, SE, XLE or XSE badge.

Toyota Camry Oil Type, Capacity and Torque Specifications

Check these details before removing the drain plug. Most 2018–2024 2.5L Camrys specify 0W-16, the 3.5L V6 specifies 0W-20, and the 2025–2027 hybrid-only generation specifies 0W-8. The published 2.5L refill amount also changes for 2024.

Camry / specificationRecommended information
2018–2023 Camry 2.5L gasoline SAE 0W-16; about 4.8 US qt (4.5 L) with filter replacement
2018–2023 Camry 2.5L Hybrid SAE 0W-16; about 4.8 US qt (4.5 L) with filter replacement
2024 Camry 2.5L gasoline or Hybrid SAE 0W-16; about 4.5 US qt (4.3 L) with filter replacement
2018–2024 Camry 3.5L V6 SAE 0W-20; about 5.7 US qt (5.4 L) with filter replacement; cartridge-style oil filter
2025–2027 Camry 2.5L Hybrid SAE 0W-8, JASO GLV-1; about 4.5 US qt (4.3 L) with filter replacement
Oil drain plug torque 30 lb-ft (40 N·m) in the documented 2018–2024 2.5L and 3.5L service procedures; verify against the exact year’s repair information
2.5L spin-on filter tightening For the documented 2024 2.5L procedure: 13 lb-ft (17.5 N·m) with the specified tool, or 3/4 turn after gasket contact by the approved method
3.5L V6 cartridge housing For the documented V6 procedure: main filter cap 18 lb-ft (25 N·m); small housing drain plug 9 lb-ft (12.5 N·m)

Before you pour: These capacities are refill references, not a reason to empty a full container into the engine. Start below the listed amount and finish by checking the dipstick. Confirm your exact model’s specification in the Toyota owner’s manual, especially if you have a 2024 or newer Camry.

For many 2018–2024 2.5L Camrys specifying 0W-16, Toyota permits 0W-20 temporarily if 0W-16 is unavailable. For 2025–2027 hybrids specifying 0W-8, Toyota permits 0W-16 temporarily. In either case, return to the specified grade at the next oil change. Do not switch to thicker oil merely because Sarasota summers are hot.

Tools and Supplies Needed

Have the correct oil, filter and drain-plug washer ready before you lift the Camry. The filter style is the main detail that changes the tool list: the 2.5L uses a spin-on filter, while the 2018–2024 V6 uses a filter element inside a reusable housing.

  • Oil of the specified viscosity and sufficient quantity
  • Correct replacement engine oil filter
  • New drain-plug gasket or sealing washer
  • Ratchet and appropriate drain-plug socket (commonly 14 mm)
  • 10 mm socket for lower access-panel fasteners, where fitted
  • Spin-on filter wrench or V6 filter housing tool, as applicable
  • Replacement V6 cartridge housing O-rings, if applicable
  • Torque wrench suited to the required specifications
  • Oil drain pan with adequate capacity
  • Clean funnel and lint-free shop towels
  • Protective gloves and safety glasses
  • Wheel chocks and appropriately rated ramps or jack stands, if needed

Work on firm, level ground with the parking brake set. If you raise the vehicle, use approved lifting and support points. Never work underneath a car supported only by a hydraulic jack. On a hybrid, confirm that the READY indicator is off before going under the vehicle; the gasoline engine can restart without warning while the hybrid system is active.

How to Change Oil in a Toyota Camry (2018–2027)

The steps below describe the shared oil-change process. Follow the 2.5L spin-on-filter or 3.5L V6 cartridge-filter instructions as appropriate, and check the correct service information before using a torque value on your particular Camry.

01 Step 1: Identify the Engine and Prepare the Camry

Confirm the model year and engine using the owner’s manual, vehicle information or a reliable parts lookup. This matters most if you have a 2024 Camry: its 2.5L refill reference differs from earlier years, even though the specified oil viscosity remains 0W-16.

Park on level ground, apply the parking brake and switch the vehicle off. A short drive beforehand can warm the oil so it drains more freely, but allow the oil and exhaust components to cool enough to work around without getting burned.

Open the hood. Locate the oil filler cap and dipstick. Remove the cap and place it somewhere clean so dirt cannot enter the filler opening.

02 Step 2: Open the Lower Oil-Service Access Area

Safely raise and support the front of the Camry only if extra ground clearance is necessary. Locate the lower engine cover or oil-service access panel beneath the engine.

Many 2.5L configurations have a small panel secured by four screws with 10 mm heads. Other model years and the V6 may use different covers. Remove only the fasteners needed for access, supporting the panel so its mounting tabs do not break.

Look for the engine oil pan drain plug and oil filter. Do not confuse an engine oil drain plug with a transmission or transaxle drain plug. If you cannot positively identify the component, stop and check the service diagram before proceeding.

03 Step 3: Drain the Old Engine Oil

Position a drain pan beneath the engine oil drain plug, allowing for the oil stream to move outward when the plug comes free. Use a properly fitting socket to loosen the plug counterclockwise, then finish removing it carefully by hand.

Keep your hand clear of the flow—used oil can still be hot. Let the oil drain until it slows to an occasional drip.

Take note of what you see. Dark used oil alone is not proof of an engine problem, but obvious metal particles, a milky appearance or a surprisingly low amount of drained oil deserve further investigation.

Collect the oil for recycling at an approved facility. Never dispose of used engine oil in a storm drain or household trash.

04 Step 4: Inspect the Drain Plug and Replace Its Washer

Clean the drain plug and check its threads and sealing surface. Remove the old gasket or sealing washer; it may be stuck to the plug or to the oil pan. Check both surfaces rather than assuming it came away with the plug.

Do not stack a new washer over an old one. A double-washer condition or a damaged sealing surface can leave a leak even when the plug feels tight.

Fit the correct replacement washer and keep the plug clean until you’re ready to reinstall it. If the threads are damaged or the plug will not start smoothly by hand, do not force it.

05 Step 5: Remove the Old Oil Filter

For Camry 2.5L Engines With a Spin-On Filter

Move the drain pan under the filter. Loosen the filter counterclockwise with a correctly fitting filter wrench, then unscrew it by hand. Additional oil will spill from the filter and mounting area, so keep the pan in position until the flow slows.

Once it’s off, inspect the engine’s filter mounting surface. The old rubber gasket must come off with the filter. If it stays on the engine, remove it before installing the replacement. Two filter gaskets can cause a sudden oil leak on startup.

For the 2018–2024 Camry 3.5L V6

The V6 uses a paper filter element inside a reusable housing. First remove the small drain plug in the filter housing. Use the appropriate filter-housing drain adapter and collection hose to drain the oil retained inside the housing, as directed by the V6 service procedure.

Then remove the main housing cap with the correct housing tool. Take out the paper element and the old housing O-ring. Clean the cap, threads and O-ring groove. Avoid using sharp tools that could nick the housing or its sealing surface.

06 Step 6: Install the New Oil Filter Correctly

Spin-On Filter: Inspect, Oil the Seal and Tighten

Compare the replacement filter with the old one and confirm its part number or fitment. Lightly coat the new filter’s rubber gasket with clean engine oil unless the filter maker instructs otherwise.

Screw it onto the engine by hand until the gasket seats against the mounting surface. For the documented 2024 Camry 2.5L procedure, Toyota specifies 13 lb-ft (17.5 N·m) using the appropriate torque tool, or 3/4 turn after gasket contact using the specified turn method. Check the method for your exact engine and filter.

Do not keep tightening simply to make it feel more secure. The filter seals through its gasket, not by being crushed against the mounting surface.

V6 Cartridge Filter: Replace the Element and Both Seals

Install the replacement paper element into the clean housing. Lightly oil a new main O-ring and fit it into the correct groove without twisting it. Clean the engine-side sealing surface before threading the housing into place.

For the documented 2018–2024 3.5L V6 procedure, tighten the main filter housing to 18 lb-ft (25 N·m). Fit the new small-drain-plug O-ring and tighten the housing drain plug to 9 lb-ft (12.5 N·m). Confirm that the housing seats evenly and no O-ring is pinched or protruding.

07 Step 7: Reinstall the Engine Oil Drain Plug

When the oil has finished draining, wipe the drain opening clean. Install the drain plug with its new washer, starting it by hand. The plug should turn smoothly; if it binds, back it out and inspect the threads.

For the documented 2018–2024 Camry 2.5L and V6 service procedures, Toyota specifies 30 lb-ft (40 N·m). Confirm your exact model-year value before tightening with a torque wrench.

Clean drips from around the drain plug and filter. A dry starting surface makes it easier to spot a fresh leak later. Leave the access panel off for the final inspection if it can be done safely without getting under a running vehicle.

08 Step 8: Refill the Camry With the Correct Engine Oil

Place a clean funnel in the oil filler opening. Use the oil type for your specific engine and start with a little less than the capacity shown in the chart.

For example, a 2022 Camry 2.5L lists about 4.8 quarts of 0W-16 with a filter change; a 2024 Camry 2.5L lists about 4.5 quarts of 0W-16; and a 2025–2027 Camry Hybrid lists about 4.5 quarts of 0W-8. A 2018–2024 V6 has a different requirement: about 5.7 quarts of 0W-20.

Check the dipstick before topping up. Fresh oil can be difficult to see, so use good lighting and read both sides if necessary. Add small amounts rather than pouring in the remaining oil automatically.

Remove the funnel, refit the filler cap and make sure the dipstick is fully seated.

09 Step 9: Inspect for Leaks and Check the Final Oil Level

Check the initial dipstick level, then start the gasoline engine with all tools and people clear of the engine and underbody. If the oil-pressure warning stays on, switch the engine off immediately and investigate before restarting.

Hybrid owners should follow the appropriate Toyota procedure for verifying oil circulation and leaks; the gasoline engine may not run continuously in normal READY operation. Never put yourself beneath a vehicle while its hybrid system is active.

With the vehicle safely off, inspect the drain plug and filter area for fresh leaks. Once the engine has warmed and been shut off on level ground, wait about five minutes for the oil to drain back. Wipe the dipstick, insert it fully, pull it out again and check that the level is between the marked limits.

Top up only if needed. Do not fill above the upper mark. After completing the inspection, securely reinstall any lower cover you removed and confirm no clips, screws or tools have been left underneath.

Record the mileage, oil grade and date. That record is useful the next time the maintenance reminder appears.

10 Step 10: Reset the Toyota Camry Oil Change Reminder

The service reminder does not know whether you replaced the oil. After finishing the work, use the instrument-cluster controls to reset the correct maintenance item for your Camry.

2018–2024 Camry: Scheduled Maintenance Reset

On 2018–2024 models with the common 4.2-inch or 7-inch instrument display, use the steering-wheel arrow and OK buttons:

  1. Park, select P and switch the ignition ON without starting the gasoline engine. For a push-button-start vehicle, follow the owner’s-manual ignition-ON procedure without making the hybrid system READY.
  2. Use the steering-wheel arrows to reach the Settings (gear) icon on the multi-information display. Dismiss any pop-up message with Back if necessary.
  3. On the 4.2-inch display, select Vehicle Settings and press OK.
  4. On the 7-inch display, select the vehicle-settings symbol and press and hold OK when prompted to enter that menu.
  5. Scroll to Scheduled Maintenance and press OK.
  6. Choose Yes and press OK to confirm the reset.
  7. Wait for the completion message, then switch the ignition off and back on to check that the maintenance message no longer appears.

If you cannot find Vehicle Settings, check whether you are in the instrument cluster rather than the infotainment touchscreen. Display layouts vary by year and equipment.

2025–2027 Camry Hybrid: Oil Maintenance Reset

Newer Camry hybrids have an Oil Maintenance item separate from Scheduled Maintenance. The following procedure is documented in Toyota’s 2025 Camry Hybrid owner instructions; confirm any changed wording on 2026–2027 displays:

  1. Park safely, select P and apply the parking brake.
  2. Start the hybrid system with the vehicle stationary. The oil maintenance information cannot be reset while moving. Use a properly ventilated location.
  3. Use the steering-wheel meter controls to select Settings (gear icon), then press OK.
  4. Highlight Vehicle Settings and press and hold OK.
  5. Select Oil Maintenance and press OK.
  6. Select Yes and press OK to reset the oil maintenance data.
  7. Check the confirmation or updated oil-maintenance distance, then switch the hybrid system off.

If the reminder stays on: Check whether you reset Oil Maintenance or Scheduled Maintenance—they can be separate records. Complete the on-screen confirmation, and verify the exact message before resetting anything else. An oil-pressure warning or engine fault is not a routine reminder and requires diagnosis.

How Often Should a Toyota Camry Get an Oil Change?

For many U.S.-market 2018–2027 Camrys using their specified oil, Toyota’s normal oil-and-filter interval is 10,000 miles or 12 months, whichever comes first. Other scheduled inspections may occur every 5,000 miles or six months, so a 5,000-mile maintenance notice does not always mean an oil change is due.

Toyota lists shorter 5,000-mile or six-month oil-change intervals for certain special operating conditions. These can include driving primarily on dirt or dusty roads and repeated very short trips in freezing weather; follow the exact maintenance guide for your model year rather than automatically treating every stop-and-go trip as severe service.

If you drive around Sarasota, frequent short errands, long periods parked at a seasonal home, or heavier daily commuting are worth discussing when planning maintenance. Florida heat by itself does not justify ignoring Toyota’s recommended oil viscosity. Check the dipstick between services, particularly on a higher-mileage Camry that has begun using or leaking oil.

Common Toyota Camry Oil Change Mistakes to Avoid

Buying oil by model name instead of engine. A 2022 2.5L Camry and a 2026 Camry Hybrid have different specified viscosities. Check the manual and engine before buying oil.

Assuming every 2.5L takes 4.8 quarts. The published refill reference for 2024 differs from 2018–2023. Always finish with a dipstick check.

Treating the V6 filter like a spin-on canister. The 2018–2024 3.5L uses a reusable cartridge housing and O-rings. Use the correct housing tool and tightening procedure.

Leaving the old filter gasket or washer behind. Inspect the engine’s filter pad and the drain-plug sealing surface; doubled seals can leak.

Skipping the first-start leak check. A filter may appear secure before startup but leak once oil pressure develops. Inspect after the engine has run, from a safe position.

Resetting every maintenance notice. Reset the appropriate item only after its required service is completed. A low oil-pressure warning must never be treated as an ordinary maintenance reminder.

Toyota Camry Oil Change FAQs

What oil does a 2018–2023 Toyota Camry 2.5L take?

For U.S.-market 2.5L gasoline and hybrid models in this range, Toyota specifies SAE 0W-16. The published refill reference with a new filter is approximately 4.8 US quarts. Confirm your exact owner’s-manual specification.

How much oil does a 2024 Toyota Camry need?

The 2024 2.5L gasoline and hybrid engines list approximately 4.5 US quarts with the filter replaced. The 3.5L V6 lists approximately 5.7 US quarts and uses a different oil grade. Check the engine before selecting either amount.

Does the 2025–2027 Toyota Camry Hybrid use 0W-8?

Yes. Toyota specifies SAE 0W-8 meeting JASO GLV-1 for the U.S.-market hybrid-only generation. Approximately 4.5 US quarts is the reference quantity with a new oil filter. Toyota allows 0W-16 temporarily when 0W-8 is unavailable, with a return to 0W-8 at the following oil change.

Where is the oil filter on a Toyota Camry?

The engine oil filter is accessed from beneath the engine. Most 2.5L engines covered here use a spin-on filter; the 2018–2024 3.5L V6 has a cartridge element inside a reusable housing. Your engine determines the correct filter and tool.

Why does my Camry say maintenance required at 5,000 miles?

Toyota schedules routine maintenance at 5,000-mile or six-month intervals, while the normal oil-and-filter replacement interval for many models is 10,000 miles or 12 months. Check the maintenance guide to see which items are actually due before resetting the reminder.

Do I need to reset both Oil Maintenance and Scheduled Maintenance?

Not automatically. On newer Camry hybrids, these are separate service records. Reset Oil Maintenance after completing the oil change and reset Scheduled Maintenance only after the applicable scheduled work has been performed.

Professional Toyota Camry Oil Changes in Sarasota, FL

If you’d rather have your Camry serviced professionally, Sherman’s Auto Repair in Sarasota, FL can help with engine oil and filter changes, oil leak concerns and routine Toyota maintenance.

Whether you drive an older 2.5L Camry, the 3.5L V6 or a newer Camry Hybrid, the correct oil specification and a careful final leak and level check make a difference.

Schedule Your Toyota Camry Oil Change

Sherman’s Auto Repair
757 Gantt Ave, Suite 9
Sarasota, FL 34232

Phone: (941) 444-7057

Request Service Today

Explore Our Oil Change Services in Sarasota, FL

Explore Our Toyota Repair & Maintenance Services in Sarasota, FL

Get help keeping your Camry’s oil service on schedule with maintenance suited to its engine and model year.